Roofing Crews Serving Burbank, CA
Roofing in Burbank, CA for Homes and Commercial Buildings
We repair and replace roofs across Burbank, and we answer our own phone. Describe the problem, and we will prepare a free estimate. Our crews work on houses, apartment buildings, and commercial property across the city.
(424) 672-3864Our crews cover Burbank from our base in Culver City. You describe the roof, and we ask about the address, the slope, and the covering material. Often, we can price the work accurately from that first conversation.
Roofing contractors serving Burbank, CA
We measure many roofs from satellite imagery before anyone drives out. That keeps the first conversation honest about size, pitch, and probable cost. When a roof needs direct inspection, we schedule a visit and explain why.
Most roofing calls here fall into two familiar groups. One is an active leak that needs immediate repair. The other is a worn covering that has reached the end of its service life.
- Leak repair, flashing repair, and slipped or cracked tile
- Full roof replacement, including tear off down to the decking
- Flat and low slope roofing for commercial buildings
- New roofs from plans when a builder supplies them
Roof repair in Burbank, CA starts with the leak
Leaks generate more calls than any other roofing problem. A stain on the ceiling means water found a gap somewhere above it. We begin at the flashing, the metal that seals roof to wall joints.
We take small repairs, not just complete roofs. We patch shingles, reset loose tile, and seal flashing that has pulled away from the wall. We also explain when a patch only buys you a single season.
Storm damage can undo a patch much sooner than one season. So we tell you what a patch will and will not fix before we start.
We only move the conversation to replacement when the roof earns it. A sound roof with one bad valley does not need a tear off. How we handle roof repair explains where we draw that line.
- Ceiling stains, drips, and damp attic sheathing
- Cracked, slipped, or missing tile
- Torn shingles and lifted ridge caps after wind
- Rusted flashing at walls, chimneys, and valleys
Roof replacement and re-roofing in Burbank, CA
A replacement makes sense when the covering fails across the roof, not in one corner. We strip the old layers down to the decking, the boards that carry the roof. Then we replace any wood that has rotted.
Cost follows the roof, not a standard price list. We price by the square, meaning one hundred square feet of roof surface. Pitch, stories, and existing layers move that number in ways a chart cannot predict.
We will not print a price here, because we would be guessing. Bring us the address, and we will walk you through the real drivers. What a full roof replacement involves covers the tear off and decking work behind them.
- Roof size, counted in squares
- Pitch, height, and how many stories our crews work above
- How many old layers sit on the deck
- Rotted decking found after tear off
Residential roofing and commercial roofing in Burbank, CA
Most of our roofing work sits on houses. Our residential roofing work covers single family homes, additions, and small multi unit buildings. Residential full replacement remains the project we handle best.
A commercial building starts a different conversation. Property managers ask about low slope systems, access, and tenant disruption before they ask about price. We quote offices, retail, and professionally managed buildings across the city.
Commercial owners often want a repair first, and we take that work. We will tell you when a repair carries the roof, and when it does not. Our commercial and low slope roofing work goes through those systems.
Houses and commercial buildings both need a straight read on condition. We look at the whole roof, then tell you what needs doing first.
- Single family homes, additions, and small multi unit buildings
- Offices, retail, and property managed buildings on low slope roofs
- Repairs on commercial roofs, plus full replacement when the deck allows
Shingle, tile, flat, and metal roofs in Burbank
Asphalt shingle is the system we install most often. Tile comes next, and it rarely needs a full replacement. The tile outlives the underlayment, the waterproof layer that sits beneath it.
So a tile roof usually gets a lift and relay. We lift the tile in sections, strip the failed underlayment, replace damaged decking, and restack your original tile. Ask us whether your tile is sound enough to reuse.
Flat and low slope roofs usually take a torch down system, a modified bitumen sheet we weld with heat. Standing seam metal uses raised seams and concealed fasteners. We install TPO whenever a building owner requests it.
We can go deeper on any of these when you call. If metal interests you, our standing seam metal roofing work covers panels and seams. Ask us which one fits your roof and your budget.
- Asphalt shingle repair, tear off, and re roof
- Tile lift and relay, in clay, concrete, and slate
- Torch down modified bitumen for flat and low slope roofs
- Standing seam metal with concealed fasteners
Burbank roofs, ZIP codes, and older housing
We cover Burbank roofs in 91501, 91502, 91504, 91505, and 91506. Give us the address, and we will start from what covers it now.
The median Burbank home dates to 1958, and 72.8 percent of local housing predates 1980. Building age is not roof age, and we never estimate one from the other. Older housing does tell our crews to look hard at decking and existing layers.
So we judge every Burbank roof on its own condition.
Burbank Building Permits for roofing work
Permits come up early in Burbank roof conversations. Owners want to know who pulls one and what it covers. We help property owners work through the current permit path for their job.
The City of Burbank publishes its own building permit information, and we point you there first. We never promise approval, fees, timing, or who the city treats as the applicant. Those answers belong entirely to the city, and they change regularly.
Bring us the address and the scope, and we will tell you what we know. Where a permit applies, we walk it with you instead of leaving you guessing.
Free roofing estimates in Burbank, CA
Our Culver City roofing team gives a free estimate, every time. Call (424) 672-3864 and tell us about the roof, or send the short form on this page. We answer that line ourselves.
A detailed roof inspection or written report is a separate, paid service. Escrow buyers and insurance carriers often request that documentation. The fee moves with the roof itself, so ask us for the current price when you call.
We work from Culver City, CA, and Burbank sits inside the areas we serve. Call (424) 672-3864 when you want that free estimate.
Frequently asked questions
What is the average cost of replacing a roof in California?
We do not publish an average, because a California average would never price your roof accurately. Size in squares, pitch, stories, existing layers, and hidden rot determine the number. Call us with the Burbank address, and we will give you a free estimate.
How much does a 1800 sq ft roof cost?
Floor area is a starting point, not the roof itself. We price by the square, and a steep roof carries more surface than the floor below. Give us the Burbank address, and we will measure the roof and quote it free.
What is the most expensive part of replacing a roof?
On our projects, the costs you cannot see from the ground usually run highest. Rotted decking is the most common change order we write, and tile roofs add labor on both ends. We price the tear off and the relay plainly, then flag the rot risk before you sign.