Roof repair and roof replacement

Roofing in Venice, CA for Homes and Commercial Buildings

Water stains, slipped tile, and worn shingles tend to show up all at once. Our roofers find the cause, then fix or replace what failed. Call us for a free estimate.

(424) 672-3864

Roofing inquiry

Request a FREE Roofing Estimate

Submitting this form sends your request to our Culver City roofing team for follow-up.

Your details are used only to respond to this roofing request. Do not include private financial or insurance information.

Venice is part of the City of Los Angeles, and we cover roofing across the wider city too. Owners here call us with the same worries we hear every rainy season. A stain spreads across the ceiling, and nobody knows where the water started.

Standing-seam metal rooflines across a residential construction property

Roof leaks and aging roofs in Venice, CA

We start by finding the cause. Loose flashing, cracked shingles and slipped tile each leak in their own way. Our roofers name the problem before anyone talks about a new roof.

The cause decides what happens next. It sets the method, the material and the size of the job.

  • Leak diagnosis on shingle, tile, flat and metal roofs
  • Flashing repairs at chimneys, valleys and roof-to-wall joints
  • Slipped tile resets and shingle patching
  • We replace rotted decking before new covering goes down

Roof repair or full roof replacement

Two jobs sit behind almost every call. A targeted roof repair suits damage that stays in one place. A full tear-off and re-roof resets the entire system instead.

Repair suits isolated damage. We reset slipped tile, patch shingle fields and rebuild flashing at the usual leak points. That work buys real years when the underlayment below still holds.

Replacement makes sense once the covering has reached the end of its life. We strip to the deck, replace rotted sheathing, then lay fresh underlayment and covering.

Roofing for homes, duplexes and commercial buildings

We roof single-family homes, duplexes and small apartment buildings. Roofing for houses walks through that work, and commercial low-slope roofing picks up the other side. Commercial owners and property managers run on different schedules than households.

Residential jobs run around your household, your driveway and your neighbors. Commercial work runs around tenants, rooftop equipment and business hours. We schedule the loud stages where they cause the least trouble.

Commercial callers often ask for TPO first. We install it, and we will walk you through the low-slope choices before you commit.

Asphalt, tile, torch-down and standing seam metal roofing

We cover the systems this market runs on. That means asphalt shingle, clay and concrete tile, torch-down flat roofing and standing seam metal.

Tile itself rarely needs replacing. The underlayment beneath it fails first. We lift the tile, replace the felt and any bad decking, then restack your original tile.

Flat and low-slope decks get torch-down modified bitumen by default. Metal work means standing seam panels with concealed fasteners. Ask us which system suits your building, and we will explain the trade-offs.

  • Asphalt shingle repair, tear-off and re-roof
  • Tile lift and relay with new underlayment
  • Torch-down modified bitumen for flat and low-slope decks
  • Standing seam metal with concealed fasteners
  • TPO for commercial low-slope roofs

Permit help on roofing projects that need one

Permit questions come up early on replacement projects. The Los Angeles Department of Building and Safety publishes the current permit steps for this work. We help property owners follow those steps.

We will not guess at approval, fees or timing. The department decides those, and the answer changes with the project. Check the official permit page before you plan around a date.

Roofing across Venice neighborhoods

Roof calls reach us from every corner of Venice. Most begin with a stain, a slipped tile, or a flat roof holding water. What we find decides the fix.

The Venice Community Plan splits the community into eight subareas. We cover Oakwood-Millwood-Southeast Venice, North Venice, the Venice Canals and the Marina Peninsula. Ballona Lagoon East, Ballona Lagoon West, Silver Strand and the Oxford Triangle fill out the rest.

We take both repairs and replacements in each of them. The scope questions stay the same everywhere. The covering, the underlayment and the decking answer them.

Aerial view of adjoining residential shingle roof sections

Tell us about parking, alley access and roof height when you call. Those answers matter on any Venice street. We plan our work and the material drop around them.

Roofing crews working from our Culver City base

We run this work from our Culver City base.

Our crews travel to the job, so one team handles your roof from estimate to cleanup. They cover every community on our service list the same way. We explain what we found in plain language, and we keep the estimate clear.

Get your free roofing estimate

Tell us what you are seeing, and we will scope the work. Estimates for roof repair and roof replacement are free. We take on the whole range of roofing work, from a single flashing repair to a complete re-roof.

A detailed roof inspection with a written report is a separate paid service. Ask about it when you call, and we will explain the difference.

Call (424) 672-3864 and get your free estimate started.

  • Free estimates on roof repair and roof replacement
  • Residential roofs and commercial low-slope roofs

Frequently asked questions

Are estimates for roof repair and roof replacement free?

Yes. Estimates for roof repair and roof replacement are free. A detailed roof inspection with a written report is a separate paid service.

Do I need a roof repair or a full re-roof?

That depends on the scope of the damage. Isolated flashing leaks or a few slipped tiles often point to repair. Widespread underlayment wear, rotted decking or repeat leaks usually point to replacement.

Culver City Roofing Contractors
Culver City, CA
(424) 672-3864